AirFinery Air Purifier: AQI & PM2.5 Reduction Case Study
Explore a technical analysis of AirFinery Air Purifier performance at AdFactor PR. See real data on AQI, PM2.5, and PM10 reduction in hazardous conditions.
AirFinery Air Purifier Demonstration
Demo Findings & Observations at AdFactor PR
Meeting Overview
Date: 29th December 2025 | Location: AdFactor PR, Okhla Phase III
Supplier: MRH Technologies Pvt. Ltd. (Represented by Mr. Puneet Kataria & Ms. Priyanka Manocha)
Customer: AdFactor PR (Represented by Mr. Lila Ram Dangwal, Mr. Shwetank Sharad, Mr. Harish Kumar)
Subject: Demo, Observations & Findings of AirFinery Air Purifier
Agenda & Scope
The primary objective of the session was the demonstration of the AirFinery Air Purifier unit. The scope included a comprehensive review of air quality readings including AQI, PM2.5, and PM10 to formulate a data-driven action plan.
Measurement Activities
General Measurement Period: From 26th December 2025 (Every 3 hours).
AirFinery Installation Measurement Period: From 23rd December 2025 (Every 3 hours).
Locations Monitored: Basement, Reception, Main Gate, First Floor, Second Floor (Plot 9 & 11), Outside Area.
Operational Unit Location: Second Floor (11 Plot).
AQI Comparison: Max Readings
Comparison of maximum recorded AQI levels. The AirFinery area showed drastic improvement compared to outside and non-purified indoor areas.
Particulate Matter Reduction
Analysis of PM2.5 and PM10 pollutants. Measurements indicate levels dropping significantly in the treated area (2nd Floor - 11 Plot).
Detailed Observations
Inside Premises (Untreated): High pollution load observed. AQI: 400-550, PM2.5: 200-400, PM10: 280-450.
Outside Premises: Extremely hazardous baseline. AQI: 450-750, PM2.5: 250-550, PM10: 290-550.
AirFinery Zone (2nd Floor): Excellence performance. AQI: 08-90, PM2.5: 05-61, PM10: 06-66.
A significant reduction of approximately 75% to 85% in AQI, PM2.5, and PM10 levels was observed in the area where the AirFinery Air Purifier was installed.
Performance noted at Low Mode (reduced airflow)
Action Points & Next Steps
Recalculation: Reassessment of required units considering the high performance achieved even at Low Mode (lower CFM).
Proposal: MRH Technologies to submit a revised recommendation based on the new coverage calculations.
Planning: Further discussions to be scheduled post-review of the revised calculations.
Thank You
MRH Technologies Pvt. Ltd.
Priyanka Manocha (VP) & Puneet Kataria (Sr. BDM)
- air-purifier
- aqi-reduction
- environmental-technology
- case-study
- air-quality
- pm2.5
- industrial-purification